Whitelist Instructions For Most Email Options

Manually Add to Safe List

1. Click gear the icon on the top right.
2. Select Options in the drop down list.
3. On the Options page under Preventing junk email click Safe and blocked senders
4. Click the link Safe senders on the next page.
5. Enter the email address [email protected] in the text box.
6. Click Add to list
7. John ‘Samples’ Clark will now be added to your list of Safe senders
8. Emails added to your Safe senders will not be delivered by mistake to your Junk folder.

AOL Webmail

To make sure our email gets delivered to your AOL Inbox- Please complete these two steps…

If you find John ‘Samples’ Clark in your spam folder:

1. Right click the email.
2. Click “Not spam” in the resulting list.

Add [email protected] to your Address Book:

1. Open the email from John ‘Samples’ Clark
2. Click the show details link next to John ‘Samples’ Clark in the From field.
3. Move your mouse over or tap [email protected] to show the menu.
4. Click or tap Add contact in the menu displayed.
5. Add John ‘Samples’ Clark to the name fields
6. Click Add contact

Email from that Domain will now be delivered straight to your Inbox.

Comcast

Please log into your Xfinity account and select your Comcast webmail:

1. Should you find an email from John ‘Samples’ Clark in your spam folder:
2. Open the email.
3. Click the  
   Spam (not spam) icon on the top toolbar.

Next please, add John ‘Samples’ Clark to your address book:

1. Please open the email from John ‘Samples’ Clark.
2. Click on the button at the top left of the email that says:

[email protected]

+ Add to Address Book

3. That will open your edit contact screen.
4. Then click Save and you’re all done.

EarthLink

If you are not receiving email at EarthLink, there are two actions you can take.

1. Check Suspect Email folder
2. Add John ‘Samples’ Clark to your address book.

With EarthLink, if you have SpamBlocker turned on, suspect messages are automatically send to your Suspect Email folder if the Domain is not in your address book.

Suspect Email Folder:

1. While in the Suspect Email folder, if you see John ‘Samples’ Clark…
2. Select the Move to Inbox and Add Contact option from the drop down menu.
3. This will add [email protected] to your Address Book for future email delivery assurance.

Address Book Inclusion:

1. Open the email.
2. Click Add to Address Book in the email header.
3. Use the Address Book Editor to verify the sender’s contact details and click save.
4. Fill in [email protected] as the email address of the sender.
5. Any mail sent with the same Domain (right of the @ sign) will now be delivered to your Inbox.

AT&T

AT&T no longer maintains their own inbox.

Instead you can find your AT&T emails at Att.Yahoo.com

Please follow the Yahoo instructions for whitelisting an ATT.net email address.

Click or Tap here, to scoll to the Yahoo instructions…

Mozilla Thunderbird

Please open your Thunderbird email client:

If an email from John ‘Samples’ Clark appears in your Junk Folder:

Please mark that message as Not Junk.

Next, please add John ‘Samples’ Clark to your Address Book:

1. Click the Address Book button.
2. Make sure the Personal Address Book is highlighted.
3. Click the New Contact button.
4. Under the Contact tab, copy and paste the “From” address, [email protected] into the email text box.
5. Click OK.

Security Software

Norton AntiSpam

This problem may happen if [email protected] is accidentally added to the Blocked List.

To remove the [email protected] from the Blocked List:

1. Start your Norton product.
2. Click Settings.
3. Depending on your Norton product, do one of the following:

For Norton 360:

1. In the Settings window, under Detailed Settings, click AntiSpam.
2. On the Filter tab, next to Blocked List, click Configure.

For Norton Internet Security:

1. In the Settings window, on the Network tab, click Message Protection.
2. Under AntiSpam, next to Blocked List, click Configure.
3. In the Blocked List window, select the item that you want to remove, and then click Remove.
4. Click Apply, and then click OK.
5. If you do not find [email protected] in the Blocked list, go to next step.

To add [email protected] to the Allowed List:

1. Start your Norton product.
2. Click Settings.
3. Depending on your Norton product, do one of the following:

For Norton 360:

• In the Settings window, under Detailed Settings, click AntiSpam.
• On the Filter tab, next to Allowed List, click Configure.

For Norton Internet Security:

1. In the Settings window, on the Network tab, click Message Protection.
2. Under AntiSpam, next to Allowed List, click Configure.
3. In the Allowed List window, click Add.
4. In the Add Email Address window, from the Address Type drop-down, select the address type.
5. Add [email protected], and then click OK.
6. In the Allowed List window, click Apply, and then click OK.

---



McAfee Products

While McAfee has removed spam protection in the latest Anti-Virus software- You may still have a version that offers spam filtering.

1. In order to add John ‘Samples’ Clark to the friends whitelist, please open McAfee and click on Web & Email Protection.
2. Then click on Anti-Spam

There you can see various settings. You can change the spam protection level, change filter settings, etc.

3. Click on Friends list
4. Please add [email protected] to your “Friends List” to always allow emails from John ‘Samples’ Clark.

---



Trend Micro

If you received an email message that was incorrectly moved to the Spam Mail folder by the Anti-Spam Toolbar you can prevent this from occurring in the future.

The Anti-Spam Toolbar detects spam by looking for certain keywords in the email’s subject or body. Occasionally, it may detect what you consider legitimate email as spam.

To prevent this from occurring you can do either of the following:

1. Add the John ‘Samples’ Clark to the list of Approved Senders.
2. Decrease the Spam Email Filter Strength.

Note: You can also select the email and click Not Spam to report it to Trend Micro. However, this feature serves only as a reference to their spam database, and it may not have an effect on how the toolbar detects spam.

Add the sender to the list of Approved Senders:

1. Open Microsoft Outlook.
2. Click the Spam Mail folder then select the legitimate email detected as spam.
3. Click Approve Sender on the toolbar.
4. Click Yes when the confirmation message appears.

Decrease the Spam Email Filter Strength:

1. Open Microsoft Outlook.
2. Click Trend Micro Anti-Spam then click Settings.
3. On the Spam Filter tab, move the slider bar to select a lower filter strength.
4. Click OK to save your settings.

Spam Filters

---



Cloudmark SpamNet

Cloudmark filters email based on content footprints. To assure our email has not been mis-identified as spam:

1. Select Cloudmark | Options… from the Cloudmark SpamNet toolbar in Outlook.
2. Click Advanced.
3. Go to the Whitelist tab.
4. Click the Add button.
5. Type: [email protected]
6. Click OK.
7. Click OK.
8. Click Yes.
9. Click OK.

---



SaneBox

Sanebox is not a filter, but a filtering system trained by you.

1. Open your Webmail or Gmail where you use SaneBox.
2. Open your @SaneLater folder.
3. If you find an email from John ‘Samples’ Clark or an email from [email protected] in @SaneLater…
4. Please drag my email to your Inbox folder.
5. By doing this you will always get our great content in your Inbox from now on!

---



Spam Assassin

Spam Assassin is usually administered by your server admin. Please contact your admin and request that he or she:

1. Add the following entry to your user_prefs file, which is found in the .spamassassin subdirectory on your web/mail server
2. whitelist_from [email protected]
3. Save the user_prefs file or move the updated copy to your .spamassassin subdirectory.

---



Barracuda Networks

Occasionally, Barracuda Spam Firewall will mark a legitimate message as spam. There are two methods to whitelist email senders.

Whitelist Quarantined Senders:

1. Open your email client. Barracuda should send you a summary each day listing quarantined items. Choose the most recent Barracuda email message.
2. Locate the email from John ‘Samples’ Clark and the sender email address [email protected] that you do not want quarantined in the future. Click on the word “Whitelist,” which is in green print to the right of the email title. This will open your list in a web browser.
3. Click the box to the left of the email that you would like to whitelist. At the top of the page, click “Whitelist.” Barracuda will not block or quarantine the sender whose email address appears on the whitelist.

Whitelist Senders and Domains:

1. Open your web browser. Navigate to your company’s Barracuda firewall homepage.
2. Click on the Block/Accept tab.
3. Choose “Sender Domain Block/Accept.” Enter the Domain name from [email protected] to whitelist. For example, you can enter aol.com to allow all AOL addresses.
4. You may enter a comment to remind you why you allowed this Domain. Click “Add.”
5. Click your mouse on the “Email Sender Block/Accept” tab. Enter the email address of an individual sender that you want to whitelist, such as “[email protected]“
6. Include a comment. Click “Add.” In the future, Barracuda will not block emails from this sender.

Most Used Spam Filters

SPAMfighter

Highlight the email from John ‘Samples’ Clark with the email address [email protected] to Whitelist.

Click “More” in the SPAMfighter Toolbar and select “Whitelist”.

Here you can choose if you want to Whitelist the email address [email protected] or the whole Domain.

To be sure that all emails from people in your Outlook contacts get through to you, you can import and Whitelist them.


To do this, follow these steps:


1. Click “More” in the SPAMfighter toolbar.
2. Then “Options”
3. Then “Filter settings”
4. Then “Blacklists & Whitelists”
5. Then “Whitelist email address”
6. Then “Import”.
7. Select your ‘Address Book’ and click on “Check all”
8. Click “Add”
9. Click “Apply”

If you get a pop-up box offering you to upgrade to SPAMfighter Pro, it is because you have exceeded the limit of 100 addresses. You can fix this by buying SPAMfighter Pro or by deleting some of the addresses in your Black/White list. If you want to delete addresses, please go to:

1. Click More” in the SPAMfighter toolbar.
2. Then “Options”
3. Then “Filter settings”
4. Then “Blacklists & Whitelists”

Mail Washer

1. Click Tools, then Blacklist & Friends.
2. Click Add… on the right, the Friends list side.
3. Make sure Plain email address is selected.
4. Type: [email protected]
5. Click OK.
6. Click OK.

ChoiceMail

1. Open ChoiceMail
2. Click on the Senders tab
3. Choose “Approve another Sender”
4. Type in the sender email address [email protected]
5. Click on OK

Spam Sleuth

1. Select File, then Configure.
2. Go to the Friends category.
3. Make sure Active is checked.
4. Type: [email protected] on a line by itself in the entry field.
5. Click OK.